《基于“CAXA实体设计”的组合夹具标准件库的开发研究》-毕业论文.docVIP

基于“CAXA实体设计”的组合夹具标准件库的开发研究 PAGE - PAGE 4 - 毕业设计（论文） 设计题目:基于“CAXA实体设计”的组合夹具标准件库的开发研究 姓 名： 学 号： 所 属 系： 自动控制与机械工程学院 专业班级： 制造及其自动化 指导老师： 2011年5月 摘要 本文主要研究基于CAXA实体设计的组合夹具标准件库的开发，为满足市场的不同需求，厂家的生产模式大多是多品种小批量的生产，同类型产品需要系列化。组合夹具标准件库的开发为生产提供一种简单、快捷、更有利于实现产品创新的设计工具,有效地提高设计人员的工作效率。传统的组合夹具设计主要依靠手工完成，CAD 设计系统主要采用以交互式为主的半创成式设计方法。现在，大量三维实体造型软件崛起，如Pro / E 、Solidworks、UG、Solidedge 等，推动了设计领域的新革命，由于这些三维软件，可创建三维实体模型。国产的CAXA 实体设计软件便是其中优秀的一款。由于组合夹具的组件全部是标准件，而且数量有限，易于储存和检索等特点，使建立组合夹具站成为可能。若将计算机辅助设计应用到组合夹具设计中，尤其是将CAXA 实体设计软件应用到组合夹具设计中，则可使组合夹具的设计非常快捷，装配生产率得以显著提高。 关键词: 组合夹具；标准件库；CAXA；实体设计；装配图 Abstract This paper mainly based on CAXA entity design, a combination of fixture standard parts library, to meet the different needs of the market, manufacturers of production patterns are largely small-batch production of many varieties, the same types of products require serialization. Modular Fixture Standard Parts Library for the production to provide a simple, fast, more conducive to product innovation, design tools to effectively improve the efficiency of the design staff. The traditional design mainly depend on modular fixture by hand, CAD design system is mainly used to record into a semi-interactive-based design method. Now, the rise of a large number of 3D solid modeling software such as Pro / E, Solidworks, UG, Solidedge, etc. to promote the design of a new revolution, these three-dimensional software, to create three-dimensional solid model. CAXA-made software is one of the physical design of a good. As the modular fixture component parts are all standard, and a limited number of easy storage and retrieval features, make the establishment of modular fixture station possible. If we apply computer-aided design of modular fixture design, especially the design of software applications CAXA entity to the design of modular fixture, you can very fast modular fixture design, assembly productivity can