《风扇前壳注塑模设计》-毕业论文.docVIP

PAGE 风扇前壳注射模设计 摘要 塑料模具是用来生产塑料制品的模具，在设计模具之前，必须对塑料的成型工艺性能有充分的了解和掌握，只有充分熟悉成型工艺条件之间的内在关系，才能精确的控制 尺寸与塑料制品尺寸，才能设计出优良的模具。 本次设计主要是进行风扇前壳注塑工艺及模具设计。通过对风扇前壳塑件特点分析,介绍了风扇前壳注塑模理论设计过程,阐述了从注塑成型工艺分析，到注射机型号的选择，再到模具的结构设计，其中包括有分型面的选择、浇注系统的设计、模架的选择或设计、成型零件的设计、推出机构的设计、冷却系统的设计等，以及相关的工艺计算的设计步骤，其中包括有注射的校核计算、成型零件的工作尺寸及强度校核计算、推出机构的校核计算、冷却系统的设计计算等 在设计过程中，通过使用注塑模软件对塑件进行模流，选择聚丙烯的成型工艺参数，设计了一摸一腔的注塑模具。按照聚丙烯的平均收缩率设计计算模具成型尺寸。同时介绍成型零件的加工制造过程。通过一系列的分析设计出的产品，工作稳定可靠，生产效率高，能够很好的满足生产的要求。 关键词：　风扇前壳；注塑模； Abstract Plastic mold is a mold used to produce plastic products, in the design of the mold before, plastic molding process must have full understanding of the performance and control. Only by fully familiar with the processing conditions the intrinsic relationship between them, precise can control size and size of plastic products. To design a good mold. Based on the washing machine outlet features of plastic parts, introduced before the fan shell theory of injection mold design, and describes the injection molding process from analysis to model the choice of injection machines, to mold the structural design, including a hand-type surface selection, gating system design, the choice of mold or design, molded part design, introduction of mechanism design, cooling system design, and related design and process design steps, which include checking calculation injection molding Part of the job size and strength calculation is the introduction of body checking calculation, the calculation of the cooling system design. Practice shows, that the mold design is reasonable, accurate and reliable, good quality plastic parts, high efficiency, fully able to meet user requirements. In the design process, software by using injection mold plastic parts mold flow, polypropylene molding process parameters chosen, design of injection mold cavity first touch of a mold. The average shrinkage rate by PP molding size calculation, Also introduce the process of molding parts manufacturing. Analysis of design through a serie