《基于软件无线电的无线多径性能分析系统》-毕业论文.docVIP

PAGE 本科毕业设计（论文） 题 目 基于软件无线电的无线多径性能分析系统 学生姓名： 专 业： 电子信息工程 指导教师： 课题组 完成日期： 2012-5-31 摘 要 软件无线电（softwareradio）在一个开放的公共硬件平台上利用不同可编程的软件方法实现所需要的无线软件无线电电系统，简称SWR。理想的软件无线电应当是一种全部可软件编程的无线电，并以无线电平台具有最大的灵活性为特征。全部可编程包括可编程射频（RF）波段、信道接入方式和信道调制。 本文介绍了软件无线电的意义与发展趋势，软件无线电在当代的作用已经越来越重要。软件无线电平台主要由DSP 模块，FPGA 模块，射频模块，AD/DA 模块组成。各模块在研究中有各自的功能。本实验设备是由实验平台、信号发生器和终端计算机组成，使用DSP实现无线多径信道下不同调制方式的解调实验的仿真。本课题所研究的是在高级软件无线电平台上实现无线多径信道下不同调制方式下的发射信号在接收端的误码率的测量，从而对无线多径信道性能进行估测。 关键词：软件无线电，信号发生器，FPGA，DSP ABSTRACT Software radio ( softwareradio ) in an open public hardware platform using different programmable software method to realize the required software radio system. Referred to as SWR. The ideal software radio should be a full software programmable radio, and radio platform with maximum flexibility for feature. All programming includes programmable radio frequency ( RF ) band, channel access mode and channel modulation. This paper introduces the significance and development trend of software radio, software defined radio in contemporary plays a more and more important role. Software radio platform by DSP module, FPGA module, RF module, AD/DA module. Each module in the study of their function. The experimental device is composed of an experimental platform, a signal generator and a terminal computer, use DSP to achieve the wireless multipath channel under different modulation demodulation simulation experiment. The subject of the study is the software radio platform to achieve the wireless multipath channel under different modulation transmitting signal at the receiving end of the bit error rate measurement, thus the wireless multipath channel performance estimation. Key words: Software Radio, Signal Generator, FPGA,DSP 目 录 TOC \o \h \z HYPERLINK \l _Toc327374681 摘 要 PAGEREF _Toc327374681 \h I HYPERLINK \l _Toc327374682 ABSTRACT PAGEREF _Toc327374682 \h II HYPERLINK \l _Toc327374683 目 录 PAGEREF _Toc3