《年产3.5万吨镁质耐火材料厂的设计》-毕业论文.docVIP

摘 要 本设计主要阐述了年产3.5万吨镁质耐火材料厂在设计中的重大问题以及方案的选择。 首先，根据设计要求，设计原则，产品的种类（镁砖，镁铝砖，镁铬砖）及工厂的规模和生产方法，确定出生产的工艺过程，原料配比和颗粒的组成，各个车间的工作制度等。 其次，进行物料平衡计算，主机平衡计算，根据计算结果进行设备选型。再根据设备在工厂中的安装要求及检修要求进行车间房布置。 再次根据主机设备的需要对辅助设备进行选择。选择出合理的辅助设备并且确保主机设备正常高效运行。 接着，对初步设计完成后的每个车间视其自身的特点进行合理的技术经济编制。 最后，对设计中遗留的的问题进行了讨论。另外本设计中穿插有设备的外形尺寸图和工艺布置图，便于阅读和理解。 关键词：工艺设计,镁砖,镁铝砖,镁铬砖 Abstract This design describes the major issues of an annual 35,000 tons output of magnesia refractories plant in the design mainly and explained choices of the program. First, according to design requirements, design principles, product type (brick, magnesia brick, magnesia-chrome brick), the plant size and production methods,it is to determine the production process, the proportion and composition of particles, each workshop work system and so on. Second, it is to work out the material balance, and the host balance. And then, according to the result, it is matching the equipment type and it is arranging the factory according to installation of requirement and examination in the factories. After that, it is to draw up the reasonable technology and economy due to the each workshops self character after finishing the first design. Finally, it is to discuss the missing issues of design. Moreover, there are papers of equipments appearance and arrangement in the design. It is convenient to read and understand. Key words: process design, Magnesia brick,Magnesium aluminum brick,Magnesia chrome brick 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc28095 1. 文献综述 PAGEREF _Toc28095 1 HYPERLINK \l _Toc20446 1.1原料 PAGEREF _Toc20446 1 HYPERLINK \l _Toc10715 1.1.1 镁石 PAGEREF _Toc10715 1 HYPERLINK \l _Toc28163 2. 结构与形态 PAGEREF _Toc28163 2 HYPERLINK \l _Toc29086 1.1.2 镁砂 PAGEREF _Toc29086 3 HYPERLINK \l _Toc25412 1.2各种砖的介绍 PAGEREF _Toc25412 3 HYPERLINK \l _Toc4834 1.2.1镁砖 PAGEREF _Toc4834 3 HYPERLINK \l _Toc18570 1.2.2镁铝砖 PAGEREF _Toc18570 4 HYPERLINK \l _Toc9080 1.2.3镁铬砖 PAGEREF _Toc9080 5 HYPER