《蜗杆副滚动检查机设计》-毕业论文.docVIP

蜗杆副滚动检查机设计 摘 要 本文的研究内容为蜗杆副滚动检查机的设计。 首先，本文对蜗轮蜗杆齿轮传动结构进行相关学习与了解，明确具体检测安置方式以及检测项目。 其次，进行了检测机的总体设计。根据蜗轮蜗杆齿轮传动结构特点，以普通车床基本结构为基础，确定了检测机基本结构为以机床主轴部分，通过四爪卡盘加装蜗杆并以顶尖固定，蜗轮安装在对应车床刀架位置，实现其滚动检测。 最后，根据检测机的总体方案，设计、并绘制了机床的零部件图，主要包括总体装配图，检测机床体、主轴等重要部件的零件图，完成了主轴的强度校核和主轴轴承的寿命校核计算。 本文的设计结果，完全满足蜗杆副滚动检测基本要求，实现了装夹方便、操作简单的目标。 关 键 词：蜗轮蜗杆，滚动检测,机床，设计  THE DESIGN OF WORM GEAR PAIR MESHING CHECKER ABSTRACT What the paper study is that design the special checker for meshing status of worm gear pair, how to place them and things needed to be checked. Firstly, we had a basic understanding of the theory of worm gear pair. Then the overall design of the checker and the design of its parts. According to the meshing properties of worm gear pair, based on the structure of ordinary lathe, establish the base of the checker, fixed with four-jaw chuck hand and finial. Worm gear is placed on a platform where was used to be the tool carrier, to achieve the check purpose. The final design of the checker turned out to be able to fully meet the working requirements, easy to manage and achieve our desired demand. KEY WORDS: Worm and worm gear, Roll check，Machine tool，Design  目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc295054352 第1章 绪论 PAGEREF _Toc295054352 \h 3 HYPERLINK \l _Toc295054353 第2章 检测机总体设计 PAGEREF _Toc295054353 \h 3 HYPERLINK \l _Toc295054354 §2.1 方案分析 PAGEREF _Toc295054354 \h 3 HYPERLINK \l _Toc295054355 §2.2 电动机选择 PAGEREF _Toc295054355 \h 4 HYPERLINK \l _Toc295054356 §2.3 V型带设计 PAGEREF _Toc295054356 \h 5 HYPERLINK \l _Toc295054357 第3章 零部件设计 PAGEREF _Toc295054357 \h 8 HYPERLINK \l _Toc295054358 §3.1主轴部件设计 PAGEREF _Toc295054358 \h 8 HYPERLINK \l _Toc295054359 3.1.1 主轴设计 PAGEREF _Toc295054359 \h 9 HYPERLINK \l _Toc295054360 3.1.2主轴校核 PAGEREF _Toc295054360 \h 9 HYPERLINK \l _Toc295054361 3.1.3主轴轴承校核 PAGEREF _Toc295054361 \h 12 HYPERLINK \l _Toc295054362 §3.2 丝杠设计校核 PAGEREF _Toc295054362 \h 14 HYPERLINK \l _Toc295054363 3.2.1压杆稳定性校核 PAGEREF _Toc295054363 \h 14 HYPERLINK \l _Toc