《异相型游梁式抽油机设计和计算》-毕业论文.docVIP

异相型游梁式抽油机设计和计算 摘 要 由于我们基本国情和我们能源所需，我们国家80%的能源来之石油的提炼和开采，其中大多的原油来自我们国家的几大油田，但是我国的石油资源有限而我们国家每年所需的能源不断的增加，所以我们国家才不断引进和自主开发抽油机性能。 其中论文中所说的主要是游梁式抽油机机运动分析；动力分析与平衡计算：受力分析；强度计算；节能效果和节能机理研究；节能改造；造成摆锤式复合平衡抽油机；CAD 系统等内容。 其中论文对游梁式抽油机机各种类型分析和研究，并在相同的油井工况条件下，分析比较了它们的节能效果。 关键词 ：同常规抽油机，异相抽油机，偏轮抽油机，弯梁抽油机 PHEASE-TYPE BEAM PUMPING UNIT DESIGNAND CALCULATION Abstract Because our basic national conditions and our energy needs, 80% of our nations energy to the oil refining and mining, most of which crude oil from several oil fields in our country, but our limited oil resources required each year in our country energy continue to increase, so our country before the introduction of pumping performance and self development. One paper said the main beam pumping unit machine movement analysis; dynamic analysis and balance calculation: stress analysis; strength calculation; energy efficiency and energy-saving mechanism; energy saving; resulting compound pendulum balanced pumping unit ; CAD systems and so on. One paper machine for all types of beam pumping unit analysis and research, and the oil wells in the same working conditions, the analysis and comparison of their energy-saving effect KEY WORDS：With conventional pumping unit，Phase unit, Partial wheel unit, Bending beam pumping unit 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc289854320 摘 要 PAGEREF _Toc289854320 \h I HYPERLINK \l _Toc289854321 Abstract II HYPERLINK \l _Toc289854322 前 言 PAGEREF _Toc289854322 \h 1 HYPERLINK \l _Toc289854323 第一章 抽油机 2 § HYPERLINK \l _Toc249522390 1.1抽油机概述. 2 HYPERLINK \l _Toc289854324 §1.2我国抽油机的发展方向 4 HYPERLINK \l _Toc289854325 §1.2.1大力发展和推广应用各种节能型抽油机 4 HYPERLINK \l _Toc289854326 §1.2.2各种抽油机的特点 5 HYPERLINK \l _Toc289854327 §1.2.3 研制高效能丛式井抽油机 9 HYPERLINK \l _Toc289854328 第二章 异相型游梁抽油机性能测试 PAGEREF _Toc289854328 \h 11 HYPERLINK \l _Toc289854329 2.1异相游梁式抽油机概述 PAGEREF _Toc289854329 \h 11 HYPERLINK \l _Toc289854330 2.2样机的设计与制作 PAGEREF _Toc289854330 \h 11 HY