《RF-AV转换电路的设计》-毕业论文（设计）.docVIP

PAGE 精品 成都信息工程学院 学位论文 电视RF-AV转换电路的设计 论文作者姓名： 申请学位专业： 电子科学与技术 申请学位类别： 工学学士 指导教师姓名（职称）： （高级实验师） 论文提交日期： 年06月01日 电视RF-AV转换电路的设计 摘 要 本文介绍了将电视射频信号转换为音视频信号的工作原理。利用TDQ-3型全增补调谐器、声表面滤波器、中频处理芯片TA7680AP和LM386集成运算放大器设计了一个电视RF-AV转换电路。天线接收的空间电视RF信号输入高频调谐器，经高频滤波、放大、调谐、变频等电路处理后，将电视RF信号转换成38MHz第一中频信号，第一中频信号由声表面滤波器进行残留边带滤波后送入中频处理芯片TA7680AP，最后经检波、解调后输出音视频信号。设计的RF-AV转换电路接收频率范围45MHz～860MHz，输出视频1VP-P，阻抗75Ω，音频输出0dbm，阻抗600Ω，具有自动增益控制（AGC）和自动频率微调（AFT）功能。给出了电视RF-AV转换电路、DC32V和DC12V供电电源的电路设计原理图，完成了样机PCB板的设计，制作了样机并对样机进行了调试和检测。 关键词：射频；调谐器；声表面滤波器；TA7680；中频处理 精品 The design of the radio frequency converting to the audio frequency and the video frequency Abstract This paper introduces the principle of the radio frequency converting to the audio frequency and the video frequency. The circuit of RF-AV Conversion has been designed using all added tuner TDQ-3, surface acoustic wave filter, IF TA7680AP chip and Integrated Operational Amplifier LM386. Space television RF signal received by antenna is inputted into high-frequency turner. After high frequency filter, amplification, Tuner, frequency conversion and so on electric circuit processing, television RF signal transforms into the first intermediate frequency signal whose frequency is 38MHz. the first intermediate frequency signal which Carries on the vestigal sideband filter by the sound surface filter, Then, sent them into IF TA7680AP chip, the last by the detector, the output audio and video post-demodulation signal. The design of RF-AV conversion circuit to receive the frequency range 45MHz ~ 860MHz, Video output 1VP-P, Impedance 75Ω, the audio frequency outputs 0dbm, the impedance 600Ω, With the automatic gain control (AGC) and Automatic frequency control (AFT) function. The circuit of RF-AV Conversion and DC regulated power supply that the output is 12V and the 32V have been given the design schematic and PCB diagram, The manufacture of the sample product. Then, debugged and tested this system. Key words: radio frequency; high frequency tune