《智能在线真空滤油--中英文》课件.pptVIP

* * * * * * * Oily power Traditional Vacuum Oil Purifier The speed is limited to the foam generated in the vacuum chamber. Air should be induced into vacuum chamber to inhibit the foam going out through vacuum pump, cause lower vacuum and lower de-watering speed. oilypower Vacuum Oil Purifier An innovated patented technology was applied and the foam problems have been solved. De-watering speed is no longer limited by foam problems. Air is not need to the vacuum chamber higher vacuum applied cause higher de-watering speed. Traditional Vacuum Oil Purifier Sliding vane rotary vacuum pump applied, the vacuum oil mixing with the water from the vapor compressing cause damage and frequently maintenance. oilypower Vacuum Oil Purifier New vacuum pumps applied and water discharge from the outlet directly，no need water , and lower maintenance frequency. Traditional Vacuum Oil Purifier Vacuum chamber working at 5 – 20 kPa Abs. Surface evaporation is the major process，cause lower de-watering speed. oilypower Vacuum Oil Purifier Vacuum chamber working at 0.5 – 5 kPa Abs. Higher vacuum flash evaporation, explosive evaporation cause very high de-watering speed Traditional Vacuum Oil Purifier : Problems Vacuum oil mix with water Heater problems oilypower Vacuum Oil Purifier Non-oil vacuum pumps, no need worry about water Heater is not installed for online operation Traditional Vacuum Oil Purifier : Problems Oil go out through vacuum pump when one of the instruments ,valves or motors failure oilypower Vacuum Oil Purifier --Mutiple intelligent control strategies and protective measures assured, when one of the instruments /valves /motors failure, the PLC can find the failure and stop running automatically. --Even when power failure, two self-return valves will close the oil pipe to assure no oil go out through vacuum system. --Air is no longer needed to inhibit the foam in vacuum chamber , make it simple and reliable. oilypower Vacuum Oil P