粉细砂层硅化双液注浆加固机理及工程应用研究-岩土工程专业论文.docxVIP

西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 Study on mechanism of silicified double solution grouting reinforcement in Silty sand layer and engineering application Specialty: Geotechnical Engineering Name: He Bo Instructor: Prof. Xiao-lei Han ABSTRACT Silty sand layer which is frequently encountered in engineering construction is a kind of soft ground, when roadways, tunnels and other underground structures acrossing such strata, It often tend to collapse, caving and other engineering accident, seriously can cause the surface facilities cracking, and affect the safety and progress of the project. Through Grouting technology to improve the performance and reinforce silty sand layer is a commonly used method in engineering. Because of the the uncertainty of the geological conditions, low permeability of fine sand, variability of slurry and theoretical limitations, lead to the grouting design too much reliance on past experience. Therefore, to carry out the study on silt sand layer grouting theory and design methods has important theoretical value and engineering significance. This article combined with the project of the belt adit crossing silty sand layer of Hancheng Xiayukou coal projects, carrying out silicified grouting test study on silty sand. On the basis of research on the engineering properties, physical and mechanical indexes of silty sand, the Groutability are analyzed from three aspects as slurry performance, seepage path structure of fine silt layer and self-infiltration test. Then acoording to the laboratory and field tests to analyze the fine silt layer grouting mechanism. Being needs of engineering and experiment study, indoor simulated grouting device was developed, and grouting test was done. Influence relationship between grouting pressure, slurry viscosity, coefficient of permeability, diffusion time and grouting quantity are analyzed by test. Relevant calculation formulae between grouting amount, slurry diffusion radius and groutin