电缆外护层接地电流校准及不确定度评定.docVIP

第44卷 第504期 电测与仪表 Vol.44 No.504 2007年 第12期 Electrical Measurement Instrumentation Dec.2007 PAGE 1 - 电缆外护层接地电流校准及不确定度评定* 江翼1，冯振新1，周玮3，曹文彬2，付济良3，王先培2 （1. 国网电力科学研究院武汉南瑞有限责任公司，武汉 430074；2. 武汉大学电子信息学院 ，武汉 430072；3. 中国电力科学研究院有限公司，武汉 430074） 摘要：针对传统电缆外护层接地电流监测仪的校准过程主要在实验室参比条件下，未考虑到现场环境中存在背景泄漏电流的干扰，提出了一种基于零磁通原理与置空后注入标准信号相结合的在线校准方法。在不断电和不拆卸相关设备的情况下消除了背景泄漏电流对校准过程的影响，对监测仪校准结果的不确定度进行详细分析和评定，基于监测仪的工作原理和测试方法，通过传递比较法，验证了校准结果的可信度和不确定度的合理性。 关键词：带电检测；电缆外护层；接地电流；校准方法；不确定度；量值传递 中图分类号：TM472 文献标识码：A 文章编号：1001-1390（2018）00-0000-00 Ground current calibration and uncertainty evaluation of outer cable outer sheath Jiang Yi1, Feng Zhenxin1, Zhou Wei3, Cao Wenbin2, Fu Jiliang3, Wang Xianpei2 (1.Wuhan NARI Limited Liability companyCompany of State Grid Electric Power Research Institute, Wuhan 430074, China; . 2. School of Electronic Information, Wuhan University, Wuhan 430072 China.; 3. China Electric Power Research Institute Co., Ltd., Wuhan 430074, China) Abstract：Aiming at the traditional calibration process of grounding current monitor for outer cable outer sheathing, the interference of background leakage current in field environment is not considered under the laboratory reference conditions. AThe on-line calibration method based on the combination of zero-flux principle and space- After after the injection of a standard signal combination ofis proposed in this paper on-line calibration method, without removing the relevant equipment, the background leakage current to eliminateand the impact of the background leakage current on the calibration process is eliminated without removing the relevant equipment, a detailed analysis and assessment is conducted on the uncertainty of the monitor calibration results of the monitor. the uncertainty of a detailed analysis and assessment basedBased on monitoring The working principle and testing method o