ISO417英文版.pdfVIP

INTERNATIONAL ISO STANDARD 4017 Third edition 1999-08-15 Hexagon head screws — Product grades A and B Vis à tête hexagonale entièrement filetées — Grades A et B Reference number ISO 4017:1999(E) ISO 4017:1999(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 4017 was prepared by Technical Committee ISO/TC 2, Fasteners. This third edition cancels and replaces the second edition (ISO 4017:1988) which has been technically revised. © ISO 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec