asme无损检测人员培训、考核、资格新.docVIP

Written Practice for Training, Examination and Qualification of NDE Personnel 无损检测人员培训、考核 和资格鉴定实施细则 Doc No. 文件号 Eeeee Page PAGE \* MERGEFORMAT 1 of 25 A / 0 FIRST ISSUE 首次发放 Edition/Rev. No. 版次/修改号 Description 说 明 Prepared by 编 制 Approved by 批 准 Content 目录 No. 序号 Title 章节名称 Page页码 1 Scope 范围 3 2 Levels and Responsibility of Qualification 资格等级和责任 3 3 Qualification Requirements for NDE Personnel 无损检测人员资格鉴定要求 4 4 Responsibilities of Relevant Personnel 相关人员的职责 5 5 Initial Qualification of Level Ⅲ Ⅲ级人员首次资格鉴定 5 6 Initial Qualification of Level I and II Ⅰ、Ⅱ级人员首次资格鉴定 7 7 Grading 评分 11 8 Vision 视力检查 11 9 Certification 批准 12 10 Termination 终止 15 Appendix附录I: Training Courses培训大纲 16 1 Scope　适用范围 1.1 This document is suitable to xxxxe for control and administration of training, examination, qualification and certification of NDE personnel. 本实施细则适用于本公司无损检测人员培训、考核、资格鉴定和证书发放的控制及管理。 1.2 This Written Practice is prepared by the QA Engineer based upon SNT-TC-1A and satisfies the requirements of ASME Code applicable Sections, and meets particular needs of XXXXE. 本实施细则由质保工程师根据SNT—TC—1A 和ASME规范相关卷的要求，并结合本公司具体情况制定。 1.3 Only the NDE personnel who have been qualified and certified by XXXXE in accordance with this Written Practice are allowed to perform the nondestructive examination of ASME Code items. 只有按本实施细则培训考核合格，并由本公司发给资格证书的无损检测人员,才允许担任ASME规范产品的无损检测工作。 1.4 Each qualified personnel can only be engaged in the nondestructive examination with relation to qualified examination method(s) and his level, and shall exercise responsibility of relevant level. 不同种类的技术资格等级人员，只能从事与该类检查方法和等级相适应的无损检测工作，并负有与其等级相应的技术责任。 1.5 Nondestructive Test Methods　无损检测方法 1.5.1 Qualification and certification of nondestructive testing personnel in accordance with this Written Practice shall be applicable to each of the following methods: 本实施细则对无损检测人员的资格鉴定和批准适用于下述方法: ⑴ Radiographic Testing (RT) 射线照相检验方法； ⑵ Liquid Penetrant Testing (PT) 液体渗透检验方法； (3)Magnetic Particles Testing (