等离子喷涂制备疏水涂层的防腐性能研究探究新.pdfVIP

Material Sciences 材料科学, 2017, 7(2), 189-195 Published Online March 2017 in Hans. /journal/ms /10.12677/ms.2017.72024 Study on Hydrophobic Coating Prepared by Plasma-Spraying Anticorrosion Performance Liang Yang, Yang Cao* College of Materials and Chemical Engineering, Hainan University, Haikou Hainan th th th Received: Mar. 14 , 2017; accepted: Mar. 27 , 2017; published: Mar. 30 , 2017 Abstract Purpose of this paper was to prepare Al O -TiO coating on Q235 substrate that has good hydro- 2 3 2 phobic nature and outstanding corrosion resistance. The Al O -TiO coating with Ni-Fe interme- 2 3 2 diate layer were prepared on Q235 alloy surface using plasma spraying technology, and then the coating is characterized by using SEM (scanning electron microscope), contact angle measurement, salt fog corrosion chamber and electro chemical work station to measure the surface morphology, contact angle corrosion resistance and impedance spectroscopy of coating. Coating prepared by plasma spraying and dipping in the aqueous solutions of dodecanoic acid(ASD) for processing can make the static contact angle increase to 129˚, the change in surface morphology for ASD is not obvious after immersing in the nature sea water and storing in salt fog conditions. This indicated good corrosion resistance of the ASD coating. Keywords Anticorrosion, Resistance Hydrophobic, Plasma Spraying Technology, Static Contact Angle, Im- pedance Spectroscopy 等离子喷涂制备疏水涂层的防腐性能研究 * 杨 亮，曹 阳 海南大学材料与化工学院，海南 海口 收稿日期：2017年3月14 日；