钢质管道三层pe防腐成型生产过程自动化控制及系统优化-化工过程机械专业论文.docxVIP

化工部化工机槭及自动化研究设计院硕士学位论文ABSTRACT 化工部化工机槭及自动化研究设计院硕士学位论文 ABSTRACT This paper iS mainly about the control of steel pipe 3-layer PE anticorrosion molding process．The traditional technology iS mainly depended the workers who have plenty of experience in this process．Because of man)’ factors created by men．a 10t of shortages such energy consumption．material consumption and difficulty in control exist in steel pipe 3-layer PE anticorrosion production line．The author of this paper advances that DCS control mode should be used in this production line． The mathematic models of constant velocity driving process．heating process and PE extrusion binding process based the technological process created in the first five chapters．Driving process iS controlled by the PI controller．feed forward control arithmetic and PID controller used in heating process and PE extrusion binding process．A1l of these control system simulated in the Matlab environment，and achieve good results． According to the coupling relation of velocity and temperature，the author calculating the Bristol Matrix．From the Brist01 Matrix．we discover that the velocity and temperature strongly coupling．The attthor up the mathematic model of decoupling equipment，the steel pipe 3-layer PE anticorrosion molding process is optimized certain degrees Data from the steel pipe 3-layer PE anticorrosion molding production line of ChangQing Oil Administration is analysed in this papec Through results of the analysis mathematic models modified，which lay sound foundation for the optimization of steel pipe 3-layer PE anticorrosion molding process． Key words：3-layer PE．anticorrosion molding，process contr01．simulation． mathematic model 化工部化工机城及自动化研究设计院硕士学位论文第一章绪论 化工部化工机城及自动化研究设计院硕士学位论文 第一章绪论 1．1引言 1．1．1钢质管道三层PE防腐成型过程技术现状及发展预测 陶外钢质管道三层PE防腐成型生产线大都’其现了自动化。随着埘防 腐机理的深入研究，人们对钢质管道防腐技术的要求也求越高。1i仪涌现 出了大批的新型材料．而且对防腐成型生产过程自动化水，卜提出了越)k越 高的要求。发达国家已经实现了钢质管道!三层PE防腐成型过程的FI动化 控制，并且J1：始以产品为导向寻找新的商机。而倒内FI iJ：研制的生产线， 仍然是凭借操作人员的经验对工艺过程进行调整和控制产品质量。H内在