钢筋混凝土梁高温极限承载力计算及抗火设计方法研究-防灾减灾工程及防护工程专业论文.docxVIP

ABSTRACT Building丘m is serious hazard to peoples life and property safety．111e researchers and the engineers have consistently focused their attention on the mechanical property at elevated temperature and fire safety design of the reinforced concrete structure．which is one of the most commonly u∞ in construction．But up to present,there is not any national code related to fire resistance design of reinforced concrete structure．In this paper,the ultimate bearing capacity of reinforced concrete beam at elevated temperature and the method of．fire resistance design were researched． 1．111e thermal parameter and mechanical property of concrete and steel bar at elevated temperature were compared in different documentation of domestic and foreign countries’．And then properly parametersⅥ，唧 selected to analysis the temperature filed and the bearing capacity of reinforced conclete beam． 2．111e distribution of the temperature field is presented with ANSYS8．O．The parameters which influence the temperature field,such a5 the curve of temperature rising,the kind of aggregate，the sectional dimension and the burning time were analyzed．11舱distribution of temperature filed diagram for different sectional dimension and different buming time．and the position of 300℃and 800℃isothermal line and the simplified formula about the steel bar’S temperature of reinforced concrete beam subjected to fire were discussed． ’ 3．n幢equivalent area of concrete section was deduced by taking the two step model to consider concrete at elevated temperature。and any formula was established to calculate the ultimate bearing capacity of reinforced concrete beam,and the corresponding program in FORTR AN90w鹤built．By this pmgram,the parameters，such as the sectional dimension,the strength of concrete and steel bar,the thickness of concrete COVer and the ratio of reinforcement黼discussed．n峙 discussion indicated that the sectional dimension has to the ultimate bearing capacity of reinforced concrete beam,and w