10k以下中波发射机监控系统研制-控制工程专业毕业论文.docxVIP

Development Development on a Monitoring System for the Medium—Wave Transmitter No More than 10kW ABSTRACT Broadcast transmitter sites are usually placed relatively far fiom the residential area． Once the transmitter starts to nm,it will produce strong electromagnetic waves，which will threaten the nmning of the computer monitoring board SO seriously that the situation of broadcast transmitter monitoring incorrect information and losing control will be caused．In order to reduce the times of manual inspection,and to avoid above out-of-control situation,it is imperative to develop an emission machine monitoring system with the perfect function of anti-electromagnetic interference capability．This kind of emission machine monitoring system will make the broadcast transmitter possess the features of automatic swkcher,lifting power and complete fault protection．Therefore，a monitoring system for the medium-wave transmitter no more than 1 0kW is developed to meet the users’practical demand，which includes local monitoring equation and PC monitoring software． Firstly,the whole structure of the system is designed according to the requirements that were acknowledged by analyzing the system’S upper and lower computers．It is determined that C805 1F020 was selected as the main chip，and LCD of 240幸320 array was selected as the monitor for the lower computer,the RS485 as communication mode．Meanwhile，the communication protocol between the upper and lower computers Was determined to ensure the consistency ofdata collection from the upper and lower ones． Secondly,the circuit and the programming of the lower computer is designed．Starting from designing the power circuk，switching power supply circuit Was designed with larger power,more stable voltage，to ensl／re power supply for the whole circuit．On the aspect of Digital IO circuit，the NAND Schmia and filter capacitor was added to improve anti-jamming capability of 10 data．Anti-jamming processing and stabling diodes to prevent over curren