g毕业设计大排量矿用乳化液站设计说明书.doc

PAGE XLII I 安徽理工大学毕业设计 大排量矿用乳化液泵站的设计 摘要 此次设计以大排量乳化泵曲轴设计为主,其次是泵传动装置的设计。在第一章中将根据给定的已知的数据对泵中的一级齿轮减速机构来进行设计及校核,然后将重点放在曲轴设计及其校核上；第二章实对泵中传动系统其它的零部件进行设计,并对其进行校核计算。 此次设计，通过综合运用四年所学的知识，不仅巩固了所学的知识，而且扩大了个人的知识面,增强了自己分析问题与解决问题的能力，为今后的学习和工作打下了坚实的基础。 关键词：乳化液泵， 曲轴， 传动装置， 校核，零部件 II LARGE DISPLACEMENT Mining Emulsion Pump Design Abstract This task is the design of the emulsification pump crank primarily. Next is the pump drive installment design. First will act according to the known data in the first chapter which will assign to in the pump level gear reduction organization to carry on the design and the examination, then with emphasis will place the crank in the design and the examination; Second chapter to the pump in the transmission system other spare parts carries on the design, and carries on the examination computation to it. This design utilizes the knowledge through the synthesis which four years institute studies, not only has consolidated the knowledge which studies, moreover expanded individual aspect of knowledge, strengthened own to analyze the question with to solve the question ability, has built the solid foundation for the next study and the work. KeywordS: emulsified liquid pump, crank, transmission installment, examination, spare part 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc358303197 Abstract PAGEREF _Toc358303197 \h II HYPERLINK \l _Toc358303198 1乳液泵的设计 PAGEREF _Toc358303198 \h 1 HYPERLINK \l _Toc358303199 1.1 概述 PAGEREF _Toc358303199 \h 1 HYPERLINK \l _Toc358303200 1.2乳化液泵的总体设计 PAGEREF _Toc358303200 \h 1 HYPERLINK \l _Toc358303201 1.2.1乳化液泵泵型及总体结构形式的选择 PAGEREF _Toc358303201 \h 1 HYPERLINK \l _Toc358303202 1.2.2液力端结构形式的选择 PAGEREF _Toc358303202 \h 3 HYPERLINK \l _Toc358303203 2.在选择液力端结构形式时，应遵循下述基本原则： PAGEREF _Toc358303203 \h 3 HYPERLINK \l _Toc358303204 3. 本泵为卧式五联单作用泵液力端 PAGEREF _Toc358303204 \h 3 HYPERLINK \l _Toc358303205 1.2.3传动端结构形式选择 PAGEREF _Toc358303205 \h 4 HYPERLINK \l _Toc358303206 一、柱塞平均速度的选择 PAGEREF _Toc358303206 \h 5 HYPERL