DH系列干法滚压造粒机DHSeriesDryRollerPressingGranulator.PDFVIP

DH 系列干法滚压造粒机 DH Series Dry Roller Pressing Granulator 概述 Descriptions 粉体造粒技术作为粉粒体过程处理的一个最主要分支，随着环保需求和生产过 程自动化程度的提高，其重要性日益彰显。“粉状产品颗粒化” 已成为世界粉体 后处理技术的必然趋势。对粉状产品进行颗粒的强度加工，其意义主要体现在 三大方面： Powder granulation technology as a main branch of the powder process, with the increase of environmental protection requirements and the degree of automation of production process, its importance is increasingly evident. Powder products has become an inevitable trend in the world of postprocessing technology. The strength of the powder product is processed, and its significance is mainly reflected in three aspects: 一、降低粉尘污染，改善劳动操作条件。 One, to reduce dust pollution, improve labor operation conditions. 二、满足生产工艺要求，如提高孔隙率和比表面积，改善热传递等。 Two, to meet the requirements of production process, such as improve the porosity and specific surface area, improve heat transfer, etc.. 三、改善产品的物理性能（如流动性、透气性、堆密度）避免后续操作过程（干 燥、筛分、计量）和使用过程（计量、配料等）出现偏析、脉动、结块、架桥 等不良影响，减少污染、改善外观、改善流动性、便于贮存和运输、控制溶解 度、控制孔隙率和比表面积等等，为提高生产和使用过程的自动化以及密闭操 作创造了条件。 Three, to improve the physical properties of the products (such as liquidity, permeability, bulk density) to avoid subsequent operation process (drying, screening and measurement) and use process (measuring, mixing, etc.) segregation, pulsating, caking, bridging adverse effects appear, reduce pollution, improve the appearance, improve the liquidity, easy storage and transportation, solubility control, to control the porosity and specific surface area and so on, create the conditions for improving the production and use of process automation and closed operation. DH 系列干法辊压造粒机是采用干法辊压工艺技术，对含水量≤5%的粉状物料 进行压缩成片或块状，再经破碎整粒、筛分工艺，使片块状物料变成符合使用 要求的颗粒状物料。干法辊压造粒主要靠外部加压方式，使物料强制通过两个 相对旋转辊轮间隙，强制压缩成片块状，在辊压过程中，物料的实际密度能增 大 1.5~3 倍，从而达到－定的颗粒强度要求。 DH series dry rolling granulator is the dry rolling technology and compressed into tablets or block the content is less than or equal to 5% of the powdery material containing, crushing granulation and