[优秀毕业设计精品] 基于USB接口的光纤图像通系统总体方案设计.docVIP

PAGE 本科生毕业论文 基于USB接口的光纤图像通信系统 总体方案设计 系 （部）：电子与通信工程系 专 业： 通信工程 学 号： 学生姓名： 指导教师： 教授 2009 年 6 月 毕业设计(论文) PAGE IV 摘 要 本文主要研究的是图像由计算机发出，经过USB接口、数字图像处理模块、光纤传输系统、计算机收发软件又传回到计算机中的整个过程中的模块设计。本文中详细进行了数字图像处理模块、USB接口的方案设计已及计算机收发软件的方案设计。在USB接口设计中分别进行了软件与硬件的设计，USB软件方面我们要求接口能够成功完成编译码，在本文中我们采用的是CMI编译码，在硬件方面设计了接口电路，以及接口芯片与驱动的选择。在计算机收发软件方面我们用VB或者C++编一个接口控制程序以及收发界面，在光纤传输模块研究光纤收发系统。USB接口、计算机收发系统具体设计由项目的其他成员完成，我负责总体方案设计与光纤传输系统的设计。通过其他成员设计所的结果显示图像能够无失真的传输，证时了此方案的可行。 关键词：光纤通信实验，USB接口，图像传输 ABSTRACT This paper is issued by a computer image through USB interface, digital image processing module, optical transmission systems, computer software to send and receive images in order to achieve the transfer. In this paper, a detailed digital image processing module, USB interface of the program design and program computer software designed to send and receive. USB interface in the design of a separate software and hardware design, USB interface software, we ask the codec can be successfully completed, we have adopted in this paper is the CMI codec in hardware design of the interface circuit, and the interface chip and driver choice. Transceiver in the computer software we use VB or C + + for an interface control program, as well as send and receive interface, Research on optical transmission in fiber-optic transceiver module system. USB interface, the computer system specifically designed to send and receive from other members of the project completed, I am responsible for overall program design and the design of optical transmission systems. Through the design of the other members of the results showed that images can be transmitted without distortion, evidence of this program when feasible. Keywords: Optical fiber communication experiment, USB interface, and image transmission  目 录 TOC \o 1-2 \h \z \t 标题 3,3,标题 4,4 HYPERLINK \l _Toc232488966 摘 要 PAGEREF _Toc232488966 \h I HYPERLINK \l _Toc232488967 ABSTRACT PAG