电动工具产品造型及模具型腔数字化设计及制造.docVIP

电动工具产品造型及模具型腔数字化设计与制造 摘要 数控这个东西对于技术的要求是很高的，用的最多的就是机械的加工了，那么在这个行业上班的人，对于机械加工的相关专业知识要非常了解才行，对于数控编程，还有使用的时候要非常熟悉才可以。这篇论文设计的是生产零件时候的工艺，还有加工的时候对程序来进行编写。图纸不是手画的，画啊好啊之后，怎啊加工就再弄出具体的办法来。具体什么样儿加工定下来了，工艺卡，还有工序卡就都弄成来了。之后用电脑上的软件把加工零件的程序写出来，写啊好啊之后，再来仿真，到这块效果图就出来了。 关键词：加工工艺；编程；加工 Abstract Numerical control technology is a highly technical work, especially is most widely in application in the field of mechanical processing, so this requires practitioners with high knowledge of machining process, NC programming and NC operation skills. The design task is to the parts processing process design and programming and processing, using UG software rendering the 3D graphics of the convex concave mold, then design and processing scheme. The scheme, the key is to generate the optimal tool path, using the shortest time in the processing of parts and process optimization, processing out of the parts of the craft with the requirements of design drawings. According to these requests to select the optimum processing scheme Fill in, process cards, process card. Using software processing program, and the simulation result of the processing effect. Keywords: processing technology; programming; processing 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc19192 摘要 PAGEREF _Toc19192 I HYPERLINK \l _Toc13604 Abstract PAGEREF _Toc13604 I HYPERLINK \l _Toc26584 目录 PAGEREF _Toc26584 II HYPERLINK \l _Toc15555 第一章 绪论 PAGEREF _Toc15555 1 HYPERLINK \l _Toc29917 第二章 零件的工艺分析 PAGEREF _Toc29917 2 HYPERLINK \l _Toc28206 2.1 零件的结构特点分析 PAGEREF _Toc28206 2 HYPERLINK \l _Toc2772 2.1.1型腔图结构分析 PAGEREF _Toc2772 2 HYPERLINK \l _Toc4802 2.1.2型芯图结构分析 PAGEREF _Toc4802 3 HYPERLINK \l _Toc14917 2.2 确定毛坯 PAGEREF _Toc14917 4 HYPERLINK \l _Toc15112 2.2.1毛坯类型 PAGEREF _Toc15112 4 HYPERLINK \l _Toc29510 2.2.2毛坯余量确定 PAGEREF _Toc29510 5 HYPERLINK \l _Toc31141 2.2.3毛坯图 PAGEREF _Toc31141 5 HYPERLINK \l _Toc32050 第三章 零件的工艺规程设计 PAGEREF _Toc32050 6 HYPERLINK \l _Toc708 3.1加工顺序的安排 PAGEREF _Toc708 6 HYPERLINK \l _Toc1230 3