南 阳 理 工 学 院
本科生毕业设计(论文)
学院(系):电子与电气工程学院
专 业:电气工程及其自动化
学 生:
指导教师:
完成日期 2012 年 5 月
南阳理工学院本科生毕业设计(论文)
Design of On-line Monitoring System for Transformer Oil
总 计:毕业设计(论文)23 页
表 格: 0 个
插 图: 19 幅
南 阳 理 工 学 院 本 科 毕 业 设 计(论文)
变压器油在线监测系统设计
Design of On-line Monitoring System for Transformer Oil
学 院(系): 电子与电气工程
专 业: 电气工程及其自动化
学 生 姓 名:
学 号:
指 导 教 师(职称):
评 阅 教 师:
完 成 日 期:
南阳理工学院
Nanyang Institute of Technology变压器油在线监测系统设计
电气工程及其自动化专业分析了变压器内部故障与油中溶解气体含量的关系通讯技术PIC18F96J60单片机为主控制器,以变压器油中溶解气体监测技术完成了系统所需功Design of On-line Monitoring System for Transformer Oil
Electrical Engineering and Automation Specialty WANG Fei
Abstract: Power transformer is one of the most important equipment for the power system. Its stable operation is the reliable guarantee of the entire power system. This paper first analyzes the relation of the internal fault of the transformer and dissolved gas content in oil, then introduces the design of hardware and software of the transformer oil on-line monitoring system. The system is equipped with PIC18F96J60MCU which supports serial communication function as the main controller, and the gas dissolved in oil monitoring technology of transformer as the foundation; it completes the design of function module circuit which the system requires and the development of software function, and realizes the development and application of SCM monitoring system.
Key words: Sensor; A / D conversion; single-chip microcomputer; serial communication
目 录
1 引言 1
1.1 变压器油在线监测的意义 1
1.2 变压器油在线监测国内外发展现状 1
2系统设计方案概述 2
2.1 系统总体设计要求 2
2.2 系统方案框图设计 3
3系统的硬件设计 4
3.1 系统电源电路设计 4
3.2 单片机及晶振、实时时钟电路设计 5
3.3 串行通讯及存储电路设计 7
3.4 信号采集电路设计 9
3.4.1 传感器的选择 9
3.4.2 信号调理电路设计 9
3.4.3 A/D接口电路设计 10
3.5 液晶显示驱动和报警电路 12
4 系统软件设计 13
4.1 软件系统总体结构与流程 13
4.2 硬件监测软件模块设计 14
4.2.1 液晶显
您可能关注的文档
- 奔驰车间维修管理流程.ppt
- 奔驰智能照明系统.ppt
- 奔腾汽车钣金快速修复组合工具.ppt
- 变磁阻式传感器PPT课件.ppt
- 变电技师理论试题.doc
- 变电设备专家诊断系统讲稿.ppt
- 变电施工图设计说明书 3.doc
- 变电事业部智能变电站模型培训.ppt
- 变电事业部智能变电站一体化监控培训.ppt
- 变电所保护装置.ppt
- 中国国家标准 GB/Z 37551.300-2026海洋能 波浪能、潮流能及其他水流能转换装置 第300部分:河流能转换装置发电性能评估.pdf
- GB/T 44937.3-2025集成电路 电磁发射测量 第3部分:辐射发射测量 表面扫描法.pdf
- 中国国家标准 GB/T 44937.3-2025集成电路 电磁发射测量 第3部分:辐射发射测量 表面扫描法.pdf
- 《GB/T 44937.3-2025集成电路 电磁发射测量 第3部分:辐射发射测量 表面扫描法》.pdf
- 中国国家标准 GB/T 44937.1-2025集成电路 电磁发射测量 第1部分:通用条件和定义.pdf
- GB/T 44937.1-2025集成电路 电磁发射测量 第1部分:通用条件和定义.pdf
- 《GB/T 44937.1-2025集成电路 电磁发射测量 第1部分:通用条件和定义》.pdf
- 中国国家标准 GB/T 4937.37-2025半导体器件 机械和气候试验方法 第37部分:采用加速度计的板级跌落试验方法.pdf
- 《GB/T 4937.10-2025半导体器件 机械和气候试验方法 第10部分:机械冲击 器件和组件》.pdf
- 中国国家标准 GB/T 44937.2-2025集成电路 电磁发射测量 第2部分:辐射发射测量TEM小室和宽带TEM小室法.pdf
原创力文档

文档评论(0)