Numerical Control5.5-时5.7.pptxVIP

Numerical Control5.5-5.7 ;5.5Accuracy in Numerical Control;The backlash in its gear drives and leadscrews are important for dimensional The backlash in older machines is eliminated with special backlash make-up circuits(whereby the tool always approaches a particular position on the workpiece from the same direction) The backlash in modern machines is eliminated by using pre-loaded ball screws.Also,rapid response to command signals requires that friction and inertia be minimzed,for example,by reducing the mass of moving components of the machine. ;5.6 Advantages and Limitation of NC;;5.7 Pro