PWC-2003-TC3旋转机械振动分析.pdfVIP

Proceedings, XVII IMEKO World Congress, June 22 – 27, 2003, Dubrovnik, CroatiaProceedings, XVII IMEKO World Congress, June 22 – 27, 2003, Dubrovnik, Croatia TC1TC1 Proceedings, XVII IMEKO World Congress, June 22 – 27, 2003, Dubrovnik, Croatia TC3 XVII IMEKO World Congress Metrology in the 3rd Millennium June 22−27, 2003, Dubrovnik, Croatia ROTATING MACHINES PARTS AND THEIR VIBRATION CONTROL Miroslav Kopecky, Vladimir Cuth, Jan Vavro Faculty of Industrial Technologies – TnUAD, SK-020 32 Puchov, SLOVAKIA Abstract − The development of new aggregates of mobile machine aims at the reduction of production and operational Vibration costs and, at the same time, at the increase of transmitted power when a sufficient reliability is provided. Simultaneously, the real operational safety concerning maximum permissible stress is also rescued. This results in necessity of further more exact methods of design and strength control of aggregate elements. Keywords: Vibration, gearbox, gearmesch 1. INTRODUCTION Vibration signals from a simple epicyclical gearbox between a motor and compressor were used for all the controls presented. Higher up in the frequency range components originating from the tooth-mesh in the gearbox will be found and are in this context referred to as medium frequency components. They will be at a frequency Frequency