脉冲反吹工业集尘器吸收MOX燃料芯块干磨粉尘试验研究.pdf

Nuclear Science and Technology 核科学与技术, 2017, 5(3), 125-133 Published Online July 2017 in Hans. /journal/nst /10.12677/nst.2017.53017 Research on Dust Absorption of MOX Fuel Pellet Dry Grinding Process with Pulse Backflush Industrial Dust Collector 1 1 1 2 Rong Su , Hui Zhou , Jianzhong Mao , Dingchi Wei 1 College of Mechanical and Vehicle Engineering, Hunan University, Changsha Hunan 2 China Nuclear Power Engineering Co., Zhengzhou Henan nd nd th Received: Jun. 22 , 2017; accepted: Jul. 2 , 2017; published: Jul. 5 , 2017 Abstract Aiming at the dust absorption problem of MOX fuel pellet grinding line, combined with the existing dust removal technology and the nature of MOX fuel pellet dust, this paper designs a filter named pulse backflush industrial dust collector, based on filter dust removal technology, using spoiler, and anti-blowing principle to filter for three times, which makes the dust particles above 0.3 μm be absorbed by 99%, without secondary pollution. The dust collector is applied to the MOX fuel pellet grinding test, and a dust removal scheme is designed with the pipeline system, the fan and the control test AIDS. The effect is obvious, thus the effectiveness of the dust collector and the fea- sibility of the design system are proved. Keywords Dust Absorption, MOX Fuel Pellet, Spoiler, Anti Blow Principle, Three-Stage Filtration 脉冲反吹工业集尘器吸收MOX燃料芯块 干磨粉尘试验研究 1 1 1 2 苏 荣 ，周 慧 ，毛建中 ，魏定池 1湖南大学机械与运载工程学院，湖南 长沙 2 中国核电工程有限公司郑州分公司，河南 郑州 收稿日期：2017年6月22 日；录用日期：2017年7月2 日；发布日期：2017年7月5 日 文章引用: 苏荣, 周慧, 毛建中, 魏定池. 脉冲反吹工业集尘器吸收 MOX 燃料芯块干磨