接近开关检测技术.pptVIP

接近开关检测技术 接近开关 接近开关 电感式接近开关 电感式接近开关 Principle of inductive proximity sensor Principle of inductive proximity sensor NOTE:Only metal detection Shielded proximity sensor Shielded proximity sensor Non-shielded proximity sensor Type of metal objects and sensing range Correlation between sensing object size and sensing range 电感式接近开关 电容式接近开关 电容式接近开关 电容式接近开关 接近开关的接线方式 接近开关的接线方式 接近开关的使用注意事项 接近开关应用举例 接近开关应用举例 接近开关应用举例 Application 1 Application 1-1 Application 2 Application 2-1 Application 2-2 Application 2-3 Application 3 Application 3-1 Application 3-2 Application 4 Application 4-1 Application 4 Application 4-1 Application 4-2 THE END Observing Vibration of Parts-feeder The inductive proximity sensor observes the amplitude of vibration. Detecting Screws on Cassette Although the sensor head is very small, it can detect a metal screw reliably. GX-USERIES DC 2-wire Cylindrical Inductive Proximity Sensor Controlling Depth of Drilling The sensor detects the dog-clutch that determines the depth of drilling. GP-A SERIES High Accuracy Eddy Current Type Displacement Sensor * * 检测技术（一） inductive proximity sensor 接近开关 电感式接近开关 电容式接近开关 1. 工作原理 电感式接近开关属于一种有开关量输出的位置传感器，它由LC高频振荡器和放大处理电路组成，利用金属物体在接近这个能产生电磁场的振荡感应头时，使物体内部产生涡流。这个涡流反作用于接近开关，使接近开关振荡能力衰减，内部电路的参数发生变化，由此识别出有无金属物体接近，进而控制开关的通或断。这种接近开关所能检测的物体必须是金属物体。 2. 工作流程方框图 The detection coil located at the front end of the sensor produces a high-frequency magnetic field as shown in the figure . When an object (metallic) approaches this magnetic field, induced currents flow in the metal, causing thermal loss and resulting in the reduction or stopping of oscillations. This change in state is detected by an oscillation state sensing circuit which then operates the output circuit. It cannot detect non-metals in which current cannot flow, since detection is based on thermal loss due to induced current. Also, metals such as ferrite, which do not allow current flow, cannot be detected. The sensing range is specified for the sta