《金士顿DT108U盘上盖注射模设计及加工工艺》-毕业学术论文（设计）.docVIP

第 PAGE 1 页 摘要 本课题主要是针对金士顿DT108U盘上盖的模具设计,通过对塑件进行工艺的分析和比较,最终设计出一套注塑模。该课题从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、顶出系统、冷却系统、注塑机的选择及有关参数的校核、都有详细的设计，同时并简单的编制了模具的加工工艺。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺。根据题目设计的主要任务是金士顿DT108U盘上盖注塑模具的设计。也就是设计一套注塑模具来生产金士顿DT108U盘上盖塑件产品，以实现自动化提高生产效率及实现降低劳动力的一套模具。针对金士顿DT108U盘上盖的具体结构，该模具是侧浇口中的牛角进浇的注射模具。由于塑件要求外形美观，要求加工精度较高，经过对产品进行分析，该产品要进行测抽才可以将其注塑出来，又根据生产需要本产品采用一模四腔将产品在模具中进行分布，根据这个条件，本产品又需要做斜顶机构，这样产品才可以正常注塑出且符合客户要求。通过模具设计表明该模具能达到金士顿DT108U盘上盖的质量和加工工艺要求。 ??关键词 塑料模具 ?斜顶 滑块（侧抽） Abstract This topic mainly aimed at the mold design of the DT108U plate top head Through the analysis and comparison of the plastic product , the plastic mold was designed. This topic came from the technology capability of product, the structure of the mold embarks, the pours system, the injection molding system and the related parameter examination, the mold took shape the partial structures, the against system, the cooling system all had the detailed design, at the same time , the processing craft of the mold were simply established. Through the entire process of the design indicated this mold can achieve the processing craft which the plastic lid requested. Is Jin Shidu the DT108U plate top head casts the mold according to the topic design primary mission the design?。Also is designs a set of injection molding mold to produce Jin Shidu the DT108U plate top head to model a product, realizes the automated enhancement production efficiency and the realization reduces the labor force set of molds. In view of Jin Shidu the DT108U plate top head concrete structure, this mold is in the edge gate buffalo and cow horns enters the pouring the injection mold. Because models the request contour to be artistic, the request processing precision is high, passes through carries on the analysis to the product. This product must carry on measured pulls out only then may cast it, also needs