基于JMS的容错性组通信中间件的设计与实现-计算机应用技术专业论文.docxVIP

大近理T=人宁硕十学位论文摘要 大近理T=人宁硕十学位论文 摘要 计算机和网络技术发展到今天，人们已经不满足现有的点对点的通信应用了。计算 机支持的协同工作(cscw,Computer Supported Cooperative Work)是计算机网络技术一 个重要的发展方向，而组通信∞G Group Communication)技术是实现CSCW全部功能的 通信基础，在CSCW体系结构中占据重要地位。 组通信的实现通常有网络层模型和应用层模型两种，网络层组通信虽然通信效率较 高，但是通常需要特殊的底层硬件f如组播路由器)和特殊网络协议(iP组播路由协议和 IGMP协议1的支持，所以该模型目前为止并没有得到普遍实施，并且网络层组通信可扩 展性较差。应用层不需要底层硬件和特殊协议的支持而且具有很强的灵活性和扩展性。 本文描述了一个面向应用层的基于JMS的容错性组通信中间件架构，即文中定义 的JGCMOM(JMS-based Group Communication Message Oriented Middleware)。该架构利 用JMS技术实现了组通信中间件，从而为组成员提供透明的组通信服务，同时为了防 止组通信中间件失效造成系统瘫痪，该架构负责提供组通信服务的通信节点是分布式多 点的(Multi．JMs)，由此能够实现通信层的容错性，从而保证整个组通信业务的连续性。 关键字：组通信；计算机支持的协同工作；Multi．JMS 大近理I‘人学硕士学{上论文Design 大近理I‘人学硕士学{上论文 Design and Implementation of Fault-Tolerant Group Communication MOM based on JMS Abstract With the development of the computer and network technology,people can not be saIisfied for the communication application only using the point—to·point communication style． Computer Supported Cooperative Work(CSCW,Computer Supported Cooperative Work)is nOW an important direction of the computer network technology．Group Communication(Gc’ Group Communication)technology is the base element of the cscw,it plays a important role in the CSCW architecture． To implement GC，we usually USe the Network Layer Model or the Application Layer Model．The Network Layer Model has a better efficiency but needs the support of the special hardware(e．g．Multicast Router)and the special network protocol化．g．IP Multicast Protocol and IGMP Protoc01)．so the Network Layer Model iS not widely applied at present and the network model really has a bad expansibility．The Application Layer Model does not need the suppoft of the special hardware or the special network protocol and it is strong in both the flexibility and expansibility． This paper has proposed architecture of JMS Compliant Fault—Tolerant MOM Of Gro·- up Communication(JGCMOM)．This architecture uses the JMS technology to implement a Message Oriented Middleware(MOM)of Group Communication．The architecture