HP刀片系统技资料2011.pptVIP

在可能的情况下用验证点使你的陈述具体化 使用有说服力的数字和一般性说明 确保你传达的信息让人想到 ENSAextended 目标：可控制、有弹性和可扩展 HP Confidential – may only be shown to customers under NDA and may not be left behind with a customer under any circumstance. [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{2C224129-423F-404E-9230-83A8CED9344C}} 适时提供资源：预先提供资源和一次性连接。便于更改。 自动化协调：域和人力不会产生巨变 虚拟化：设备和连接作为资源池管理。 Lights-Out、1 对 n 管理：组管理。简化和改进流程。 最有效：拥有成本和购买成本比传统 IT 低 适时提供资源：预先提供资源和一次性连接。便于更改。 自动化协调：域和人力不会产生巨变 虚拟化：设备和连接作为资源池管理。 Lights-Out、1 对 n 管理：组管理。简化和改进流程。 最有效：拥有成本和购买成本比传统 IT 低 created by HP engineer Wade Vinson inspired by radio-controlled model airplanes engines (HP Cool Team) Image stk16120cbi? (Royalty-free)1mb - 72 dpi - 6x10 - RGB ? $ 74.99 USD /source/classes/FrameSet.aspx?UQR=mvzwjqpk=4source=frontlightboxView=1txtSearch=electricityselImageType=7chkLicensed=onchkRoyaltyFree=on AC Redundant In N + N AC Redundant power mode, a minimum of two power supplies is required. N power supplies provide power and N provide redundancy, where N can equal 1, 2, or 3. The Onboard Administrator reserves sufficient power so that any number of power supplies from 1 to N can fail, and the enclosure will continue to operate at full performance on the remaining line feed. When correctly wired with redundant AC line feeds, the AC Redundant mode ensures that an AC line feed failure will not cause the enclosure to power off. The AC Redundant mode provides full redundancy and is the configuration requested by large enterprise customers because it ensures full performance with one power line feed. Total power is amount from A or B side with the lesser number of supplies. A 3 + 3 configuration = 6750W. 适时提供资源：预先提供资源和一次性连接。便于更改。 自动化协调：域和人力不会产生巨变 虚拟化：设备和连接作为资源池管理。 Lights-Out、1 对 n 管理：组管理。简化和改进流程。 最有效：拥有成本和购买成本比传统 IT 低 Virtual Connect solves all of these problems, makes your servers change-ready and makes everyone more productive. Virtual Connect virtualizes the BladeSystem connections with the