基于creo平台的水下生产设施典型部件虚拟装配系统分析-机械工程专业论文.docxVIP

ABSTRACT The exploitation of deep-sea oil is an important developing direction of the 12th 5-year plan in our country. As oil-exploiting becomes deeper and deeper, more oil will be exploited, so more subsea production facilities are needed. Because of this, more market oppotunities are brought to the companies which make subsea production facilities. At the same time, more requirements are proposed to the method of production and management. Nowadays, the main research item in the field of virtual manufacturing technology is virtual assembly, which can really complete production efficiently , with good quality, at little time, and at little cost. In this paper, the virtual assembly technology of typical components of subsea production facilities is mainly researched, and the virtual assembly system based on the software of Creo Parametric 2.0 has been developed in the programing environment of Visual Studio software.The contents in this paper are mainly as follows: Firstly, it’s about virtual assembly technology. The research status of virtual assembly technology and the secondary development of Creo software is introduced in this paper. Then, the theory of the virtual assembly system of typical components of subsea production facilities and the development of the virtual assembly system is explained in detail. Secondly, both the technique of the extraction of the information of parts and sub-assemblies and the technique of data exchange are elaborated. The information of parts and sub-assemblies includes the information of parts and the information of sub-assemblies. The information of parts contains the features of parts and the dimensions of parts. The information of sub-assemblies contains the structure trees of sub-assemblies, the positions of sub-assemblies and the mates of sub-assemblies. On one hand, the technique of data exchange contains the upload and download of the datas from the database, which is Microsoft Access 2003 or Microsoft SQL Server Manageme