基于arm的远程自动抄表系统设计-信号与信息处理专业论文.docxVIP

AbstractAbstract Abstract Abstract Meter reading and monitoring have been management probl ems of power system for a long time．Distribution network automation and operation performance improvement is the development direction of power sector．Low efficiency and operation difficulty of traditional manual meter reading method make it lag f矗 behind the power system reforms and modem meter reading requirements．As communlcatlon technology progresses，many new meter reading methods have maintained a rapid development and have indeed solved a lot of problems in this field．However，many defects such as hi曲cost，irrational system structure．and backward communication technology do exsist．As their different developmental ways，there are no unified and effective regulations in meter reading industry,which limits its development．Advanced meter reading system with low cost，high performance and popularization convenience is the development tendency in future meter reading industry． This dissertation analyzed the development requirements and statemented the design process of the wireless meter reading system based on ARM microprocessor,which mainly included concentrator and collectors．Firstly,the dissertation explored the concept and features of wireless meter reading technology and got clear background and significance，and acquired the current situation at home and abroad ofthe research subject．On this basis，began with the development needs of the industry,this dissertation proposed a complete，workable system design scheme，introduced communication means and some key functional parts，including concentrator,collector and handheld device，and demonstrated the feseability from the overall structure of the system．Some key hardware circuits of concentrator and the collector were described in detail，such as microcontroller LM3S69 1 6．SD card circuit，ethernet interface，RS485 interface．Meanwhile，PCB design principles and requirements were given．Software description mainly related to opera