技术实习(车辆工程)外文翻译电动助力转向系统..docVIP

PAGE PAGE 16 浙 江 科 技 学 院 机械与汽车工程学院 技术实习外文翻译 题 目 电动助力转向系统 专 业 车辆工程 班 级 102 班 姓 名 吴总荣 学 号 110015036 指导教师 程 峰 完成日期 2013年 12月22日 浙江科技学院2010级车辆工程专业技术实习外文翻译 Electronic power-assisted steering system What it is Electrically powered steering uses an electric motor to drive either the power steering HYPERLINK /infobank/epc.htm \t _top hydraulic pump or the steering linkage directly. The power steering function is therefore independent of engine speed, resulting in significant energy savings. How it works : Conventional power HYPERLINK /infobank/epc.htm \t _top steering systems use an engine accessory belt to drive the pump, providing pressurized fluid that operates a piston in the power steering gear or actuator to assist the driver. In electro-hydraulic steering, one electrically powered steering concept uses a high efficiency pump driven by an HYPERLINK /infobank/epc.htm \t _top electric motor. Pump speed is regulated by an electric controller to vary pump pressure and flow, providing steering efforts tailored for different driving situations. The pump can be run at low speed or shut off to provide energy savings during straight ahead driving (which is most of the time in most world markets). Direct electric steering uses an electric motor attached to the HYPERLINK /infobank/epc.htm \t _top steering rack via a gear mechanism (no pump or fluid). A variety of motor types and gear drives is possible. A microprocessor controls steering dynamics and driver effort. Inputs include vehicle speed and steering, wheel torque, angular position and turning rate. Working In Detail: A steering sensor is located on the input shaft where it enters the gearbox housing. The steering sensor is actually two sensors in one: a torque sensor that converts steering torque input and its dire