机械制造技术课程设计-后托架831001加工工艺及钻三杠孔气动夹具设计.doc

全套图纸加扣3012250582 PAGE 34 宁 课程设计(论文) 后托架加工工艺及钻三杠孔气动夹具设计 所在学院 专 业 班 级 姓 名 学 号 指导老师 年 月 日 全套图纸加扣3012250582 PAGE I 摘 要 在生产过程中，使生产对象（原材料，毛坯，零件或总成等）的质和量的状态发生直接变化的过程叫工艺过程，如毛坯制造，机械加工，热处理，装配等都称之为工艺过程。在制定工艺过程中，要确定各工序的安装工位和该工序需要的工步，加工该工序的机车及机床的进给量，切削深度，主轴转速和切削速度，该工序的夹具，刀具及量具，还有走刀次数和走刀长度，最后计算该工序的基本时间，辅助时间和工作地服务时间。 关键词 工序，工艺，工步，加工余量，定位方案，夹紧力 PAGE 9 ABSTRACT Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally. Keywords： The process, worker one, workers step , the surplus of processing, orient the scheme , clamp strength 全套图纸加扣3012250582 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc425323140 摘 要 PAGEREF _Toc425323140 \h I HYPERLINK \l _Toc425323141 ABSTRACT PAGEREF _Toc425323141 \h II HYPERLINK \l _Toc425323142 目 录 PAGEREF _Toc425323142 \h 3 HYPERLINK \l _Toc425323143 1 后托架加工工艺 PAGEREF _Toc425323143 \h 4 HYPERLINK \l _Toc425323144 1.1 后托架的工艺分析 PAGEREF _Toc425323144 \h 4 HYPERLINK \l _Toc425323145 1.2 后托架的工艺要求及工艺分析 PAGEREF _Toc425323145 \h 4 HYPERLINK \l _Toc425323146 1.2.1 后托架的技术要求 PAGEREF _Toc425323146 \h 5 HYPERLINK \l _Toc425323147 1.3 加工工艺过程 PAGEREF _Toc425323147 \h