基于冲击式振动的PVDF压电风能收集系统的研究-电子科学与技术专业论文.docxVIP

优秀毕业论文 精品参考文献资料 基于冲击式振动的PVDF 基于冲击式振动的PVDF压电风能收集系统的研究 Study of Impact—induced Piezoelectric Wind Harvesting Based on PVDF Abstract As a clean renewable energy，wind exist everywhere in the world and its potential is huge． Piezoelectric harvester technology has great research and application value as it Can convert the wind to electrical energy to drive lOW power consumption devices．PVDF iS an ideal material that can applied to piezoelectric wind energy harvesting for its strong weatherability and good performance in dielectricity and piezoelectricity．SO PVDF was chosen as piezoelectric material in this paper．Characteristics of new raised cantilevers Was and simulated and applied to the impact．induced piezoelectric wind harvester based on PVDF． The model of triangular，inner—arC triangular and outer-arc triangular piezoelectric cantilever Was analyzed and the result showed the inner．arc triangular cantilever Can improve the strain distribution．Static characteristic，transient characteristic，impedance and model extraction of the three kinds of cantilever Was analyzed by ANSYS．the result show great agreement with model analysis that the inner-arc triangular cantilever has the best output performance．Impact·induced PVDF piezoelectric wind energy harvester、杭th wind restraint devices Was designed and tested in this Paper，the rotor Was also modified． The feasibility that the wind restraint devices and the modification of the rotor Can increase the wind speed Was verified through experiments．Piezoelectric characteristic of the triangular．iliner．arc triangular and outer．arc triangular cantilevers Was studied and the result showed that the inner-arc triangular cantilever has the highest output power of 1 98“W which is greater than the triangular cantilever’S 1 85 UW and outer．arc cantilever’S 1 56 UW，the result showed great agreement with the ANSYS simulation and model analysis．Working state of cantilever and output characteristic of array Was also studied through experiment． Ch