曲面印刷机PLC的设计说明书.docVIP

PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 曲面印刷机PLC控制系统设计 曲面印刷机主机PLC设计 摘要：传统的曲面印刷机控制方法采用的是继电器控制，而本文将设计曲面印刷机的PLC控制。PLC全称可编程逻辑控制器，它是一种专门用于工业控制的计算机，其硬件结构基本上与计算机相同，通过PLC来控制，相对于传统的控制方法来说，有使用方便，编程简单；功能强，性能价格比高； 硬件配套齐全，用户使用方便，适应性强；可靠性高，抗干扰能力强；系统的设计、安装、调试工作量少；维修工作量小，维修方便这些优点。本文还具体编写了其PLC的程序，以及各配套设施的选型、主机电路图、操控柜等外围设备的设计。 关键词：曲面印刷机，PLC电气控制 Abstract: the traditional control method of curved surface printing machine adopts the relay control, and this paper will design the PLC control of the curved surface printing machine. PLC universal programmable logic controller, it is a specifically for industrial control computer, the hardware is basically the same with the computer, through the PLC to control, compared with the traditional control method, convenient use, simple programming; strong function, high performance price ratio; complete hardware, user is convenient to use, strong adaptability; high reliability, strong anti-interference ability; system design, installation, commissioning work less; maintenance workload is small, convenient maintenance these advantages. In this paper, the specific program of the PLC, as well as the selection of various facilities, host circuit diagram, control cabinet and other peripheral equipment design. Key words: curved surface printing machine, PLC electric control TOC \o 1-3 \h \u HYPERLINK \l _Toc27796 1 引言 PAGEREF _Toc27796 4 HYPERLINK \l _Toc30685 2 可编程逻辑控制器（PLC）的介绍 PAGEREF _Toc30685 5 HYPERLINK \l _Toc22175 2.1 基本机构 PAGEREF _Toc22175 5 HYPERLINK \l _Toc17076 2.1.1 PLC的硬件 PAGEREF _Toc17076 5 HYPERLINK \l _Toc1753 2.1.2 PLC的编程 PAGEREF _Toc1753 6 HYPERLINK \l _Toc31983 2.2 工作原理 PAGEREF _Toc31983 6 HYPERLINK \l _Toc10 2.3 功能特点 PAGEREF _Toc10 6 HYPERLINK \l _Toc32722 2.3.1 使用方便，编程简单 PAGEREF _Toc32722 6 HYPERLINK \l _Toc31131 2.3.2 功能强，性能价格比高 PAGEREF _Toc31131 6 HYPERLINK \l _Toc9103 2.3.3 硬件配套齐全，用户使用方便，适应性强 PAGEREF _Toc9103 6 HYPERLINK \l _Toc6077 2.3.4 可靠性高，抗干扰能力强 PAGEREF _Toc6077 7 HYPERLINK \l _Toc32074 2.3.5 系统