基于单片机的红外遥控电子密码锁设计.doc

PAGE IV PAGE III 学科分类号：___________ 本科生毕业设计 题 目：基于单片机的红外遥控电子 密码锁的设计 采用专用的遥控编码及解码集成电路，其制作简单、容易，但由于特定功能的限制，只适用于专用的电器产品，其应用范围受到限制。 本设计由红外接收头hs0038（红外接收频率为38khz）和AT89C52控制的接收部分构成。采用单片机进行遥控系统的应用设计，具有编程灵活多样，电路结构清晰。整个设计具有遥控开锁，本机控制开锁，密码修改等功能，可在密码外泄的情况下及时修改密码，具有保密性好、安全可靠、成本低廉、连接方便，简单易用，适用范围广等特点，而且特别适合家庭，宾馆，仓库，私家车库等场所。 关键词：红外遥控；红外接收；单片机；密码修改；密码锁 Design of infrared remote control of electronic Lock based on microcontroller Abstract：Most of the lock is adopted, the largest of the mechanical faults are using simple tools can easily open the lock. In view of this situation, we designed a kind of infrared remote locks, and general equipment adopts remote coding and decoding the special-purpose integrated circuits, its production is simple, easy, but due to the particular function limit, applies only to the product, its special electrical application scope is limited. This design by infrared receiving head hs0038 (ir) and 38khz receive frequency for receiving part of AT89S52 control. On the remote control system adopts single-chip microcomputer application programming design, flexible, circuit structure is clear. The design has the remote control of the lock, lock, the password revision and so on the function, may in the circumstance timely leaked password revision password, have good secrecy, safe and reliable, low cost, simple, easy-to-use, and wide application scope, and special features for family, hotel, warehouse, private garage and etc. Key Words: infrared remote control; receiving head; SCM password revision; The lock 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325037963 第一章 绪论 PAGEREF _Toc325037963 \h 1 HYPERLINK \l _Toc325037964 1.1课题背景及目的 PAGEREF _Toc325037964 \h 1 HYPERLINK \l _Toc325037965 1.2国内外研究现状 PAGEREF _Toc325037965 \h 1 HYPERLINK \l _Toc325037966 1.3设计方法 PAGEREF _Toc325037966 \h 1 HYPERLINK \l _Toc325037967 1.4 设计过程应注意的问题 PAGEREF _Toc325037967 \h 2 HYPERLINK \l _Toc325037968 第二章 红外遥控系统方案设计 PAGEREF _Toc325037