放电等离子体处理vocs的智能测控系统研究电气工程专业论文.docxVIP

放电等离子体处理VOCs的智能测控系统研究The 放电等离子体处理VOCs的智能测控系统研究 The Research on Intelligent Measurement and Control System of VOCs Treatment with Discharge Plasma Abstract As an new treatment technology，VOCs treatment technology with plasma was proved to have advantages of high efficiency，low energy consumption，and wider range of application． However，in the current industrial applications，VOCs treatment with discharge plasma iS limited because of low degree of automation，low energy efficiency，and unable to achieve online monitoring and contr01．On the basis of analyzing the mechanism and process characteristics of VOCs treatment witll discharge plasma、and combined with the technology of other application of discharge plasma,this paper set the parameters and developed the intelligent measurement and control system of VOCs treatment with discharge plasma to resolve these problems． This PaDer determined the parameters of the system for the monitoring and contr01 were concentration，temperature，humidity，air flow rate and input power．An overall design proposal about intelligent measurement and control system of VOCs treatment with discharge plasma was raised that adopt sensors and actuators as the field level，TMS320F28335 as the core control layer，and PC as remote monitoring and management of the three-layer structure．The emission concentration was controlled by adjusting power and gas flow．Specifically，it means adjusting the output waveform duty cycle of the b5【gh voltage source inverter bridge and the degree of opening of pneumatic valve．This paper chose fuzzy control and has designed the fuzzy controller．Simulink was used to simulate the fuzzy control system．This paper compared the effect of fuzzy control with the traditional PID control，and the results showed excellent control effect offuzzy controller．Monitoring and control ofgas flow was achieved by the valve and the turbine flowmeter with stepper motor．This paper measured the power supply with quasi—synchronous sampling algorithm，an