伺服螺旋精压机控制系统研发及成形工艺库实现材料科学与工程专业论文.docxVIP

广东工业大学硕士学位论文从而保障系统安全、稳定运行。 广东工业大学硕士学位论文 从而保障系统安全、稳定运行。 第三，开发了伺服螺旋精压机控制软件。针对伺服螺旋精压机的工作特点、性 能要求、控制模式和软件开发平台，遵循系统的完整性、可观察性、有效性、可移 植性的开发原则，对系统的程序进行设计。设计了由权限管理、主控界面两部分构 成的软件系统；针对控制系统的功能特点，采用模块化和面向对象的设计方法来进 行控制系统软件的设计，把控制系统软件划分为逻辑控制部分、运动控制部分、实 时监测部分和故障检测及数据处理四部分构成的控制系统软件，并对各功能模块进 行了详细的设计。 最后，对伺服螺旋精压机控制系统进行了集成，并进行调试和检测。测试结果 表明控制系统满足伺服螺旋精压机的控制要求，控制系统具备良好的工艺适应性和 柔性，系统工作稳定、可靠；控制系统能够实现成形工艺库中的工艺，能够实现柔 性加工，同时以力为驱动条件的成形工艺的开发，拓展了伺服螺旋精压机在粉末压 制工艺中的应用。表明伺服螺旋精压机的研究与开发，对推动成形装备的数字化、 信息化、智能化及新工艺开发具有重大意义。 关键词：伺服螺旋精压机；控制系统；成形工艺库；故障诊断 万方数据 AbstractWith Abstract With the product life cycle shortened and the diversification of user requirements and new materials and new technology research and development，the working mode and movement characteristics and technological adaptability of forming equipment is becoming more and more important．However，the traditional forming equipment has single working mode and poor technological adaptability，which can’t satisfy the modern manufacturing requirements of material forming process contr01．The main development trend is that more digital，information and intelligent mo lding equipments are research and development．The slide block of servo screw coining press is drived by an AC servo motor，the velocity,acceleration，displacement and force of the slide block be realized precise numerical control by the control system．Forming equipment technology adaptability and the using range is greatly improved，provides a more convenient condition for optimizing forming process methods to improve the formability of materials，its digital intelligent control also provides the basis for forming the device into the Intelligent Manufacturing Systems．In order to promote the digitization forming equipment，information technology and the development of intelligent，the paper carries out the following research and development work for the control system of servo screw coining press． First of all，according to the functional requirements of the new servo screw coining press control