500kv宁州变电站接地网的研究分析与设计工程硕士专业论文.docxVIP

THE THE ANALYSIS AND DESIGN OF GROI．栅ING NETWORK IN 500 kV NINGZHOU SUBSTATION ABSTRACT Lightning protection and grounding technology is closely linked谢tll our life today，SO it has become a hot topic．With the increase of the national economy，the development of electric power system and the expansion of the power supply network，the lightning strike accident is increasing．In addition，with the diminishing supply of land resources，power supply eqmpmem is more intelligent，and the substation electrical layout is required more and more concentrated．Therefore，the ground connection demand is higher and higher． Grounding resistance is a important parameter of the substation ground network．If the value is too large，it may cause the insulation of the electric power system secondary equipment suffered severe damage，high pressure into the control room，leading to unreliability of motion control testing eqmpment，which may cause expansion of the accident． Therefore，the design of substation grounding system is directly related to the safe and reliable operation of power system，to ensure the safety of operators and electrical equipment．Around this situation，this paper discussed the project of 500 kV Ningzhou Substation，trying to analyze the substation ground network problems． In the first paa,this paper introduces the concepL classification and significance of the grounding,and docking technology are described briefly the present situation．What’S more， problems of the structure，function and existence of the substation ground network ale described in this paper．In the second chapter,it focuses on the main factors affecting the resistivity and the methods of measuring soil resistivity,as well aS the establishment of soil resistivity model．In Chapter 3 and Chapter 4，substation ground network design model is put forward to introduce the calculation method of earth resistance and the resistance reduction methods．Finally，according to the southern power班d company rules，the substation ground