一种高精度卷筒纸印刷机振动测试系统的设计-包装工程.PDFVIP

第 39 卷 第 11 期 包 装 工 程 2018 年 6 月 PACKAGING ENGINEERING ·219 · 一种高精度卷筒纸印刷机振动测试系统的设计 赵庆海，赵玮，赵颠颠，端木兵帅 （西安理工大学，西安 710048 ） 摘要： 目的 为了解决卷筒纸印刷机高速运转时带来的纸带横向振动问题，设计一种高精度卷筒纸印刷 机振动测试系统。方法 把纸带的横向振动转化为距离测量，采用超声波测距的方法对纸带横向振动量 进行测量，利用MSP430 单片机自带的AD 进行模数转换，把超声波探头输出距离的模拟量转化成数据 量输出，显示在液晶屏上，并在PC 端设计上位机软件，通过串口通信把测量的数据进行实时显示。结 果 通过对测试系统的实验，得到了实时的振动数据，经测试，该系统对振动纸张进行检测的精度达到 了0.1 mm 。结论 通过超声波测距方法设计出一套卷筒纸印刷机纸带横向振动测试系统，减小了测量误 差，提高了测量精度。 关键词：横向振动；超声波测距；AD 转化；上位机 中图分类号：TS803.6 文献标识码：A 文章编号： 1001-3563(2018)11-0219-07 DOI ：10.19554/j.cnki.1001-3563.2018.11.039 Design of High-precision Web Press Vibration Test System ZHAO Qing-hai, ZHAO Wei, ZHAO Dian-dian, DUANMU Bing-shuai (Xian University of Technology, Xian 710048, China) ABSTRACT: The work aims to design a high-precision web press vibration test system to solve the problem of lateral vibration of the tape when the web press runs at a high speed. The lateral vibration of the tape was converted to distance measurement, and measured in the method of ultrasonic distance measurement. The analog-digital conversion was con- ducted with AD attached to MSP430 single chip microcomputer, to convert the analog quantity of ultrasonic probe output distance into the data amount output, display it on the LCD screen, and design PC software at the PC terminal. The meas- ured data were displayed in real time through the serial communication. Through the experiment of the test system, the real-time vibration data was obtained. After the testing, the detection accuracy of the system for the vibration paper reached 0.1 mm. Through the method of ultrasonic distance measurement, a set of transverse vibration