mcse2008证考试试题.docVIP

Exam : Microsoft 70-642Title : TS: Windows Server 2008 Network Infrastructure, Configuring Certification 1. You have a Windows Server 2008 computer that has an IP address of 172.145.9/21.The server is configured to use IPv6 addressing.You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.What should you do from a command prompt?A.Type ping 172.16.45.9:::::.B.Type ping ::9.45.16.172.C.Type ping followed by the Link-local address of the server.D.Type ping followed by the Site-local address of the server.Answer: C 2. Your company uses Active Directory-integrated DNS. Users require access to the Internet.You run a network capture. You notice the DNS server is sending DNS name resolution queries to a server namedf.root-servers.net.You need to prevent the DNS server from sending queries to f.root-servers.net. The server must be able to resolvenames for Internet hosts.Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)A.Enable forwarding to your ISP s DNS servers.B.Disable the root hints on the DNS server.C.Disable the netmask ordering option on the DNS server.D.Configure Reverse Lookup Zones for the IP subnets on the network.Answer: AB 3. You have a DHCP server that runs Windows Server 2008. The DHCP server has two network connections namedLAN1 and LAN2.You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue torespond to non-DHCP client requests on LAN2.What should you do?A.From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.B.From the DHCP snap-in, create a new multicast scope.C.From the properties of the LAN1 network connection, set the metric value to 1.D.From the properties of the LAN2 network connection, set the metric value to 1.Answer: A 4. Your company has recently deployed a server that runs Windows Server 2008. The server has the IP informationshown below