基于VTK的三维地质结构模型切割算法.pdfVIP

中国科技论文在线 基于VTK 的三维地质结构模型切割算法 杨洪军，王占刚，谢海峰，杜群乐** （中国矿业大学（北京）地球科学与测绘工程学院，北京100086 ） 5 摘要：地质工作者为了更好的研究地质体的结构，需要切割三维地质结构模型并对剖面进行 分析。一般切割算法在切割质量不高的模型时得到的交线结构复杂,直接进行Delaunay 三角 剖分生成的剖面效果不理想。本文结合视觉化工具函式库（VTK ）的切割接口，提出了对建 模质量不高的三维地质结构模型进行切割的算法，其中主要包括交线的重新组织以及利用垂 10 线求交的方法。实际切割效果表明该算法在对三维地质结构模型进行切割时，生成剖面的速 度快、质量高。 关键词：三维地质结构模型；视觉化工具函式库；切割；Delaunay 三角剖分；剖面 中图分类号：TP391 15 The Cutting Algorithm for 3D Geological Structure Model Based On VTK YANG Hongjun, WANG Zhangang, XIE Haifeng, DU Qunle (College of Geoscience and Surveying Engineering ,China University of Mining Technology(Beijing),Beijing 100086) 20 Abstract: In order to study the geologic body better ，the geologists need to cut 3D geological structure models and analyze the sections. While ordinary cutting algorithm cutting a 3D geological structure model which has a bad quality ，the intersecting line is so complicated that Delaunay triangulation will produce an unsatisfactory section. This paper based on VTK ，bringing out a cutting algorithm that can cope with the 3D geological structure model which has a bad 25 quality. The cutting algorithm main including two ways ，one is reorganizing the intersecting line ， another one is computing intersection by vertical line. The actual cutting experiments show that the cutting algorithm can deal with the 3D geological structure models ，the sections are produced faster and have a high quality. Key words: 3D geological structure model ；visualization toolkit ；cutting ；Delaunay triangulation ； 30 sections 35 0 引言 通过对三维地质结构模型进行切割分析，可以清晰的展现地质体内部的细节，提高地质