2019年减速器三维设计及虚拟装配.doc

减速器三维设计及虚拟装配 摘 要 本设计主要是针对减速器的动态虚拟装配，通过对零器件结构的分析和比较，设计出一符合技术及工艺要求的减速器，并利用Pro/E做出其动态虚拟装配。该设计从分析和拟定传动方案开始，对减速器的结构、箱体、轴类、轴承组件、附件、润滑和密封等都做了详细的设计，并对动态虚拟装配做了相关说明。通过整个设计过程使该减速器符合相关要求，并以动态虚拟的形式装配出来。 根据题目知设计的主要任务一是减速器，第二是其动态装配。根据要求采用的是二级锥齿轮减速，并且通过下文的设计表明该减速器能达到相关的技术要求。 关键词：减速器，动态装配，二级，锥齿轮 Reducer design and virtual assembly ABSTRACT This design is mainly aimed at the virtual assembly, based on dynamic zero device structure analysis and comparison, design a technical and process requirements, and using the reducer Pro/E to its dynamic virtual assembly. From the analysis and design of the plan to begin, gear transmission scheme of structure, box, axle bearing parts, accessories, lubrication and sealing all made detailed design, and the dynamic of virtual assembly made related instructions. Through the whole design process makes the speed reducer, and in conformity with the relevant requirements of the virtual assembly form the dynamic. According to the knowledge, the main task of the design topic, the second is a dynamic gear assembly. According to the requirements of the second gear reducer is adopted, and the design that the reducer can reach the related technical requirements. KEY WORDS: Reducer，Dynamic assembly，Secondary，Bevel gear 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc264137197 前　言 PAGEREF _Toc264137197 \h 1 HYPERLINK \l _Toc264137198 第1章 机械传动装置的总体设计 PAGEREF _Toc264137198 \h 2 HYPERLINK \l _Toc264137199 1.1分析和拟定传动方案 PAGEREF _Toc264137199 \h 2 HYPERLINK \l _Toc264137200 1.1.1 确定传动方案 PAGEREF _Toc264137200 \h 2 HYPERLINK \l _Toc264137201 1.1.2传动方案的拟定 PAGEREF _Toc264137201 \h 3 HYPERLINK \l _Toc264137202 1.2电动机的选择 PAGEREF _Toc264137202 \h 3 HYPERLINK \l _Toc264137203 1.3运动学与动力学参数计算 PAGEREF _Toc264137203 \h 4 HYPERLINK \l _Toc264137204 第2章 传动零件的设计计算 PAGEREF _Toc264137204 \h 6 HYPERLINK \l _Toc264137205 2.1 带传动设计 PAGEREF _Toc264137205 \h 6 HYPERLINK \l _Toc264137206 2.2直齿圆锥齿轮的设计 PAGEREF _Toc264137206 \h 6 HYPERLINK \l _Toc264137207 2.2斜齿圆柱齿轮的设计 PAGE