小流量高压头离心鼓风机叶型优化设计-NSFC.PDFVIP

28 8 Vol.28 No.8 Mar.15, 2008 2008 3 15 Proceedings of the CSEE ©2008 Chin.Soc.for Elec.Eng. 77 0258-8013 (2008) 08-0077-05 TH 452 A 470 30 ⋅ ( 200240) Blade Optimization Design for a Centrifugal Blower With Low Flowrate and High Pressure Head SHU Xin-wei, GU Chuan-gang, WANG Tong, XIAO Jun (School of Mechanical Engineering, Shanghai Jiaotong University, Minhang District, Shanghai 200240, China) ABSTRACT: An optimization approach to centrifugal blower blade based on uniform design method and computational fluid dynamics (CFD) technique was presented. In this approach, 1.26% uniform design method was employed to generate the geometric information of samples, whose performances are calculated by CFD technique; the relationship between the geometric information and its performances of samples is mapped by the approximate model constructed by parallel 0 artificial networks (PANN); genetic algorithms is employed to ( 1× find the global optimal of the approximate model, which is then 4 3 10 m /h20 kPa ) evaluated by CFD technique and added to the samples database; and the last two steps of the loop are iterated until the stop criterion is satisfied. This proposed approach has been applied to the optimum design of a set of blower blades presented in this paper. The maximum isent