智能楼宇设备管理系统设计.docVIP

智能楼宇空调通风系统设计 PAGE PAGE 1 昆 明 学 院 2014 届毕业论文（设计） 论文（设计）题目 智能楼宇设备管理系统设计 子课题题目 智能楼宇空调通风系统设计 姓 名 学 号 所属院系 专业年级 指导教师 摘 要 空调系统是现代建筑的重要组成部分，是楼宇自动化系统的主要监控对象，也是建筑智能化系统主要的管理内容之一。楼宇自动化系统对空调系统的监控主要是针对集中式中央空调系统，主要包括制冷系统和新风机组控制。 在监控系统的选择上,选择不同的监控系统与此对应的组态软件也不同。例如，北京三维力控科技有限公司的组态软件是目前工业控制领域先进的监控系统，结合北京三维力控科技有限公司的特点，可知监控系统的可扩展性和性价比都很高。再加上运用PID算法，利用MATLAB仿真技术对经验法建立的中央空调控制系统模型进行仿真，从而使空调的性能得到很大的提高。有了这些软件已经能够满足这次毕业设计的需要，选择了这些软件能达到了各个系统的监控及运算，并且能改变原先人工现场控制方式，从而节约了人力、提高了效率，增加了数据实时性和可靠性。 关键词：中央空调 监控系统 算法 MATLAB仿真 Abstract Air conditioning system is an important part of modern architecture, is the main building automation systems and monitoring of intelligent building system is one of the main content of management. Building automation systems for air conditioning system is mainly directed against the centralized monitoring of the central air conditioning system, mainly including the refrigeration system and air units In selecting the monitoring system，select a different monitoring system and this corresponds to the configuration software is different. For example, Three-dimensional force control configuration software Beijing Technology Co., Ltd. is an advanced monitoring system of industrial control, combined with the three-dimensional characteristics of Beijing Science and Technology Co, force control, monitoring system known scalability and cost are high. Coupled with the use of the PID algorithm, the use of central air-conditioning control system MATLAB simulation model established by law for the simulation experience, so that the air conditioning performance is greatly improved. With this software has been designed to meet the needs of the graduate, The software can be selected to achieve the control and operation of each system, and manually change the original site control, changed the way of artificial meter, w