NiP化学镀层钝化处理工艺研究-河北工业科技-河北科技大学.PDFVIP

25 2 河 北 工 业 科 技 Vol.25, No.2 2008 3 Hebei Journal of Industrial Scienceand Technology ar.2008 : 1008-1534(2008)02-0082-04 N-i P ,,, (河北科技大学材料科学与工程学院, 河北石家庄 050018) :铬酸盐钝化处理是提高化学镀层抗腐蚀 能的一条重要途径采用正交试验对化学镀 N-i P 镀层后处理工艺进行了优化中 盐雾试验及失重分析结果发现,钝化溶液的pH 值的影响 最大, 经正交试验比较分析得出了最佳的钝化剂配方和最佳的钝化工艺, 最终获得表面孔隙率为 0耐中 盐雾腐蚀的时间达到100 h 以上的耐蚀 良好的试样 : 化学镀;钝化处理;N-i P镀层 :TQ153.2 :A Process studies on passivating treatment for N-i P electroless plating A Jing, HU Jian-wen, YAN Dong-qing,GAO Qing ( College of aterial Science and Engineering, Hebei University of Science and Technology, Shijiazhuang Hebei 050018, Chi- na) Abstract: Passivating treatment by chromate is an important way to improve thecorrosion resistance of electro-less plating. In this paper, post-treatment processes of N-i P electroless plating were optimized through orthogonal design. Neutral salt spra- ying test and mass loss analysis results show that the effect of pH value of the passivation solution on passivation is the most prominent. T he optimized passivation solution composition and optimized passivation processes are obtained. After the opti- mized passivating treatment, the porosity of the N-i P electroless plating is zero and the corrosion resistance for the NaCl salt- spraying test amounts to 100 h. Key words: eletroless plating; orthogonal design; Ni-P plating N-i P , , , P , 1 [ 1~ 3] , [4~ 6] 45 , 16 mm 10 mm,200, 400, 600, 800, 1 200, , 1 500, ( Cr2 O3 ), [4] ,, , 1 , 10%() HCl ,