基于OPENWRT平台的路由器的CWMP客户端的设计与实现-软件工程专业论文.docxVIP

哈尔滨工业大学工程硕士学位论文 哈尔滨工业大学工程硕士学位论文 - - II - Abstract With the rapid proliferation of network services, more and more routers to be resettled in the users home, but the family network terminating device complexity and diversity of the business of professional users a higher requirement. Currently the users router can only be configured through local configuration interface and manage the corresponding function, if there are problems come right equipment operators need to debug such a waste of manpower is also a waste of time, and the efficiency is not high. Used in the past in this way the user equipment management and maintenance for operators and users are no doubt a tremendous burden. By deploying TR069 protocol-based network management system can greatly reduce the users configuration and management, improve equipment ease of use and manageability. However, due to the advent TR069 time is not long, there is no open source code released, so the design TR069 protocol CWMP client to interact with the operator to obtain remote services on an important guiding significance. TR069-based protocol CWMP client uses TCP / IP as its underlying transport protocol and use SSL / TLS for secure connection is established via HTTP / HTTPS protocol transmission method contains a SOAP RPC packets through the packet structure and analysis obtained parameter upload issued, ultimately enabling ACS on the remote configuration of the client or even zero configuration. This paper studies the content TR069 protocol client each functional module design and implementation. First for TR069 protocol is the basic principle of the analysis and research, and then presents the clients overall design ideas with the major functional blocks of the division, through the realization of the ACS interactive communication module, message transmission and processing module, remote method call module, and data parameter distribution module to the ultimate realization of the client -side device for the u