- 1、本文档共116页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * DWI “two-needle type” injection nozzle for fuel and water In the CVCC, two injectors of a single nozzle hole come in contact with each other at their tips to simulate combined spray trajectories of DWI. Both injectors were electronically controlled to make it easy to synchronize all the data acquisi-tion in one injection event. Fuel nozzle has φ0.16 mm single hole and hydraulic boost was applied to set fuel injection pressure at 50 MPa. Water spray came out through a φ0.23 mm nozzle hole under 25 MPa of injec-tion pressure. DWI effect on coaxial spray / flame propagation Effect of water spray momentum along fuel spray trajectory In the visual engine, true single-injector type DWI had to be applied because of space limitation. Both nozzles had 4 holes drilled within 40 degrees of conical angle. Hole diameter for water was φ 0.36 mm and the diameter for fuel was φ 0.23 mm. For compatibility with a conventional construction, the fuel injection line was mechanically controlled to 100 MPa of injection pressure, whereas water injection line was electronically actuated un-der 26 MPa or 14 MPa of injection pressure through logic valves synchronized with engine rotation. Computational grid in KIVA III and close-up of combustion chamber Tested conditions for no water case and DWI configurations in visual engine Heat release rates at tested conditions in visual engine ?Higher temperature area in no water case A covered the base of sprays as well as their tips. Maxi-mum temperature reached to as high as 2400 K, so that NOx could generate briskly during the early combustion phase. This means water supply into the vicinity of spray roots is desirable. ? Flame temperature was clearly dropped by DWI system. For case D, for example, flame temperature reduction was from 250 to 300 K with water having 50 % o
文档评论(0)