基于PROFIBUS上型材切割生产线设计-机械制造及其自动化专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II万方数据 II 万方数据 ABSTRACT For traditional profile cutting, which usually used tooling clip and then adopted to manual cutting, or is to use mechanical cutting of Robot.However, the automatic degree is not too high, and it is wasted a lot of time in the whole technological process at the process of loading and clamping.At the same time, considering the cutting environment is not very good, the technical requirements for operator should be improved. Therefore, it cannot fully ensure the accuracy of cutting the profile requirement. With the development and impro