GP12早期生产遏制[1].pptVIP

2008-4-2 荣威550 投产准备会议 Roewe 550 Launch Conference 2008-4-2 荣威550 投产准备会议 Roewe 550 Launch Conference 早期生产遏制的好处： 随着早期生产遏制的运行，生产现场发生的问题会越来越少，从而有更好的供货质量表现 带来一系列改进 PFMEA 过程失效模式分析 防错 对生产工艺的深入理解 对过程控制的深入理解 避免一级/二级发运控制成本 2008-4-2 荣威550 投产准备会议 Roewe 550 Launch Conference 重点重申： 确定试生产控制计划是APQP的关键部分 对待早期生产遏制要如同控制发运遏制政策一样 * Increased Frequency / sample size of receiving, process, shipping inspections. Not sure if the process is capable and stable? Maybe 100% is needed until the proposed plan is validated. Sub-supplier- assume they will send bad parts. Check them out closely Additional Inspect.- add some 100% visual checks, add processes checks such as pressure, temp., speed Inc Verification of labeling- this is a big hitter at GM facilities. add extra checks. Check before it gets boxed, wrapped, put on truck. Normal processes and routines are not established. Avoid this mistake. Enhancement of process controls such as error proofing. Error proofing is a process control. Perhaps it is to slow, too expensive, too low severity, occurrence or detection. If you add error proofing to GP-12, avoiding it for production, you need to consider this very closely. Enhanc