光外差检测的条件1.pptVIP

  • 29
  • 0
  • 约2.13万字
  • 约 62页
  • 2019-02-24 发布于湖北
  • 举报
习题 一光探测器应用于光外差检测。假设入射到光混频器上的本振光功率50毫瓦,光混频器的量子效率为0.5。入射光信号功率为1微瓦, 波长1微米。负载电阻为50欧姆。系统中频带宽155MHz。背景光功率,暗电流忽略不计,系统温度为300K。 试:(1).画出系统方框图。 (2).求输出信号功率。 (3).求该系统的信噪比。 (4).该系统是否于量子声限工作。(工程上认为如果A比B大十倍时,B 可忽略不计) 这一要求意味着信号光与本振光的波前应重合,在空间上 实现角准直。 1、Requirements: From the discussion on the mixing frequency efficiency of the heterodyne detection scheme Eq.(2.2.19), we know that: Only when the signal light field and local light field have identical polarized directions、comparable amplitudes and phases at all spots on the detector’s sensitive surface, we have optimum

文档评论(0)

1亿VIP精品文档

相关文档